Print Page - how to achive this flare in metal

Title: how to achive this flare in metal
Post by: Ronak on July 06, 2018, 05:52:17 AM

Please help me with this flare, how to achieve this in rendering?

Title: Re: how to achive this flare in metal
Post by: mattjgerard on July 06, 2018, 06:06:57 AM

1) Small bright pin light in the hdri

2) photoshop

Title: Re: how to achive this flare in metal
Post by: Ronak on July 06, 2018, 06:35:09 AM

https://clvid1.bluestone.com/output/mp4/BIVS0025R01-VIDEO-26553.mp4/BIVS0025R01-VIDEO-26553.mp4

check this video. he did the same in video

Title: Re: how to achive this flare in metal
Post by: TGS808 on July 06, 2018, 09:09:54 AM

That highlight you are seeing is the reflection of a light source. As Matt stated, you can achieve it by adding a pin to your HDR image. Target where you want it to land and adjust the size and brightness to your liking.

Title: Re: how to achive this flare in metal
Post by: Ronak on July 07, 2018, 03:58:31 AM

thanks for help, i have tried adjusting pins. Still working on it

Title: Re: how to achive this flare in metal
Post by: TGS808 on July 07, 2018, 07:53:01 AM

You're getting there. If you want it to be the same as your example, make sure to use a round pin and scale it so that you see it all in the reflection. Maybe soften the edges of the pin too.

KeyShot Forum

Technical discussions => General discussion => Topic started by: Ronak on July 06, 2018, 05:52:17 AM