Print Page - cheap polycarbonate material needed :-)

Title: cheap polycarbonate material needed :-)
Post by: tibet on September 13, 2013, 02:51:37 AM

hi,

wondering, if someone would be kind enough to help me to create this cheap, but still needed material ( polycarbonate ) clear / frost / milky,

i mean a quick tip ( if there is some available) maybe texture, or bump and so on.

thanks!

(http://img.sceper.eu/images/rEzAp.jpg)

Title: Re: cheap polycarbonate material needed :-)
Post by: Speedster on September 13, 2013, 06:46:43 AM

I know the kind of extrusion you are describing- nasty stuff! Try using a "water" normal map, and really play around with it to get the common "wavy" distortion effect. There should be several "water" maps in your texture library. Then play with a tad of roughness, etc. At least it may be a starting point, and I'm sure others will chime in as well.
Bill G

Title: Re: cheap polycarbonate material needed :-)
Post by: tibet on September 13, 2013, 07:48:41 AM

hi,

thanks a lot for your tip, i

KeyShot Forum

Technical discussions => General discussion => Topic started by: tibet on September 13, 2013, 02:51:37 AM