KeyShot Forum

Gallery => Amazing Shots => Topic started by: Andrzej Orzecki on March 24, 2017, 03:11:23 PM

Title: Re: Random stuff - Trooper
Post by: Andrzej Orzecki on March 24, 2017, 03:11:23 PM
Hello guys!

To not mess up the forum with different works i will be posting here all my renderings.
First thank you guys for such a detailed response on my guitar neck shot. It is amazing how quickly i learn here new things. I have to admit that after this conversation about technical detail, i knew more about guitar building itself than on KeyShot:) But like Will said,that is the beauty of this forum.
I worked quite a bit with that model again,especially experimented with wood,and please tell me what do you think.
Thank you once again for help!

Cheers!
Title: Re: Random stuff - guitar neck
Post by: Robb63 on March 25, 2017, 10:59:03 AM
The neck wood and composition looks great. The only thing that would make it look more realistic to my eyes is that the top three strings (the thicker ones) would be wound, so they'll have a texture to them. You can see it in the attached image.

Other than that small detail that only guitar nerds will notice, this looks great!!(https://www.premierguitar.com/ext/resources/images/content/2015-12/Blogs/Jan16_Recording-Guitarist_WEB.jpg)
Title: Re: Random stuff - guitar neck
Post by: Robb63 on March 25, 2017, 11:00:21 AM
Doh! On second look, I can see there is a texture on the top strings. I would thicken that up slightly to be a bit more visible.
Nice work!
Title: Re: Random stuff - guitar neck
Post by: Magnus Skogsfjord on March 25, 2017, 04:40:39 PM
Lots of awesome texturing here, man. Great job!:)
Title: Re: Random stuff - guitar neck
Post by: Will Gibbons on March 27, 2017, 07:25:41 AM
Agreed! These look great. On one of them, I noticed a knot... I'd avoid that as no guitar would have a knot on the fretboard. Also, a darker, reddish will probably be best as it's more in line with what you see. A good, well-conditioned guitar will have been oiled up from time to time and be fairly dark. I see the wound texture you have on the strings (not sure if modeled or textured), but a great trick is to use the marble procedural for these, just remove the noise from it.

I'd also add some roughness texture to the sides of the frets. Then, use curvature or color gradient in addition to make sure the parts that touch the strings are shiny ;)

Lots of good stuff going on here!
Title: Re: Random stuff - guitar neck
Post by: fario on March 28, 2017, 01:30:50 AM
Superbe! bravo!
Title: Re: Random stuff - guitar neck
Post by: Andrzej Orzecki on March 28, 2017, 01:35:12 PM
First of all,thank you everyone! I really appreciate that help,good reviews,all the tips,tricks and improvements. Nevertheless the most important thing what i'm learning here from you guys,is a huge attention to the detail. 
You also have to remember how much you are helping beginners even with a short few words.

The wound are not modeled,texture is from keyshot cloud called ''Screw Threads3'' but it's good to know that trick,i will remember that,thank you.
The texture on the side of the frets was a huge mystery for me,and righy now even with a effort to recreate that, a ''original'' made by Magnus it's an unsurpassed example:) But again,huge thank you for that tip!

Here is a shot with a changes.

Regards!
Title: Re: Random stuff - Lion
Post by: Andrzej Orzecki on April 01, 2017, 11:53:45 AM
I present to you The Ugly one:) Just a daily stock render for practicing material graph and curvature. Any feedback are welcome.
Model from  threedscans.com

Regards!
Title: Re: Random stuff - Dragon
Post by: Andrzej Orzecki on April 07, 2017, 05:53:20 AM
Hello everyone,

A bunch of new shots after the latest material graph study. Model form threedscans.com

Best regards!
Title: Re: Random stuff - Dragon
Post by: TpwUK on April 07, 2017, 08:34:24 AM
Nice work, especially like the dragon.186

Martin
Title: Re: Random stuff - Dragon
Post by: nicordf on April 07, 2017, 10:30:07 AM
Mate your timber textures are mind blowing!
Title: Re: Random stuff - Broken heart
Post by: Andrzej Orzecki on April 09, 2017, 02:32:10 AM
Hi guys,

Highly inspired by Esben tutorial i tried to create something with touch of street art and my very first attend to photoshop also. Please tell me what do you think guys about that kind of work.
Model is from grabcad created by Onur AYTEKIN.

Thank you Nicordf and TpwUK! I don't know why but the wood is one of my favorite materials and i do my best to make it look as realistic as possible, but still a lot to learn :)

As always here is a few version of mapping and lighting.

Best!
Title: Re: Random stuff - Broken heart
Post by: TpwUK on April 09, 2017, 04:15:25 PM
UpsetLady4 gets my vote. Always happy to see people pushing different artistic views ... Keep posting whatever you do, art is a personal taste, just like a biscuit :P

Martin
Title: Re: Random stuff - Broken heart
Post by: Josh3D on April 10, 2017, 12:49:56 PM
Very cool texture. Well done.
Title: Re: Random stuff - Lu Yu
Post by: Andrzej Orzecki on April 13, 2017, 05:51:28 AM
Hello everybody

My look at awesome model of chinese monk from artec3d.com. Most of the texture are from poliigon.com

Best!
Title: Re: Random stuff - Lu Yu
Post by: Will Gibbons on April 14, 2017, 06:06:03 AM
Fantastic! The effects used on this are subtle and well-done. Great rendering.
Title: Re: Random stuff - Lu Yu
Post by: LayC42 on April 14, 2017, 11:02:26 PM
The monk render looks great. Awesome use of textures!
Title: Re: Random stuff - Lu Yu
Post by: Hossein Alfideh on April 15, 2017, 06:32:56 AM
Very cool indeed! Bravo!
Title: Re: Random stuff - Lu Yu
Post by: TyRuben on April 16, 2017, 11:29:10 AM
So much amazing -- thank you for sharing.
Title: Re: Random stuff - Nixie Tube Clock
Post by: Andrzej Orzecki on May 06, 2017, 03:30:41 AM
Hello everyone!

First of all i want to thank you guys for such a kind words about my latest work as well as for featuring ! It's a pleasure to saw that,and it's a big motivation to work harder. After a break because of different work,i would like to share a new project.

The Nixie Tube Clock is from 3dsky.org created by user - mfgolden ( www.threemarks.com ). In that place i would like to also send a huge thanks to owner for amazing model and big help from him. That clock itself is so cool and has so much potential in it,so i decide to play with it a bit more and finally a number of shots with different material,lighting and angles increase to a big amount:)

As always i would like to hear from you guys any feedback and help to improve that kind of shots!

Best regards
Title: Re: Random stuff - Nixie Tube Clock
Post by: Will Gibbons on May 08, 2017, 06:35:48 AM
Wow! These are super-clean. Not sure I have much critique. Very cool!
Title: Re: Random stuff - Nixie Tube Clock
Post by: Jed Galecki on May 09, 2017, 02:18:18 PM
Sweet and clean work.
Title: Re: Re: Random stuff - Nixie Tube Clock
Post by: NM-92 on May 10, 2017, 10:46:52 AM
This last set is awesome ! Very original concept.
Title: Re: Random stuff - Nixie Tube Clock
Post by: Andrzej Orzecki on May 12, 2017, 08:44:43 AM
Thank you very much guys ! I'm glad to hear that:)
Title: Re: Random stuff - Nixie Tube Clock
Post by: imikej on May 12, 2017, 07:20:56 PM
You are tackling a tough challenge.  If the wood is worn, so too should be the frets.  And, it's been said before, but you gotta get those top three strings to have the proper winding (ribbing).  It's a dead giveaway otherwise.  Great attention to detail and really nice work!!!
Title: Re: Random stuff - Nixie Tube Clock
Post by: Hossein Alfideh on May 18, 2017, 08:36:35 AM
Awsome stuff here! Love those closeup shots with DoF! Really fascinating.  :)
Title: Re: Random stuff - Nixie Tube Clock
Post by: TpwUK on May 21, 2017, 03:04:52 AM
I have been struggling for days trying to find words for these renders, suffice to say is that i am speechless, and that doesn't happen often.

Martin
Title: Re: Random stuff - Breitling for Bentley
Post by: Andrzej Orzecki on May 26, 2017, 10:44:32 AM
Hello everyone!

Firstly,again,huge thanks for such a kind words! I really appreciate that you guys enjoy my work and effort.

Today i want to share with you my look at presentation of a Breitling wrist watch made together with Bentley. On that model i strongly focused on detail shot as well as a lighting.
That become my small tradition so again a number of renderings increase a little.

As always please share your thoughts,opinion,suggestion and critics.

Best regards!
Title: Re: Random stuff - Breitling for Bentley
Post by: Jed Galecki on May 26, 2017, 12:59:24 PM
That's just beautiful.  Well done.
Title: Re: Re: Random stuff - Breitling for Bentley
Post by: NM-92 on May 26, 2017, 01:42:21 PM
I love the ones with the cold light. Great job with these.
Title: Re: Random stuff - Breitling for Bentley
Post by: Will Gibbons on May 30, 2017, 05:53:04 AM
Gorgeous! Did you model this? Some very, very beautiful renderings here. Well-done.
Title: Re: Random stuff - Breitling for Bentley
Post by: Andrzej Orzecki on May 31, 2017, 05:30:32 AM
Thank you guys! I really appreciate that opinions and kind words,it is a honor to hear that from such a good and experienced users!

Will,the model is not created by me,i forgot wrote that is from 3dsky.org made by erick3d. In free time i learn Alias so i hope in near future i will create something of my own :)

Best regards!
Title: Re: Random stuff - Breitling for Bentley
Post by: Magnus Skogsfjord on June 01, 2017, 03:16:03 AM
+1 on the cold lighted versions. Looks gorgeous.
Title: Re: Random stuff - Luger P08
Post by: Andrzej Orzecki on June 26, 2017, 09:34:04 AM
Hello everyone!

Today something different,a quick composition exercise. I grabbed all the models like pistol,hand grenade,bullets,oil barrels and shoes from grabcad.
I hope you like it!

Best regards
Title: Re: Random stuff - Luger P08
Post by: Magnus Skogsfjord on June 26, 2017, 02:56:42 PM
Lots and lots of nice details here. That metal is truly alive! The boots looks surprisingly detailed to be a grabcad model, but the DoF may fool me a bit.
Title: Re: Re: Random stuff - Luger P08
Post by: NM-92 on June 26, 2017, 05:02:35 PM
Metal on the pistol looks really nice ! I would rework the grenade material though. I think it should be a bit more green perhaps ?
Title: Re: Random stuff - Luger P08
Post by: Josh3D on June 27, 2017, 08:27:53 AM
Spectacular job on the gun metal, bullets and knurled surfaces! Grenade does look at bit too pristine. Great shot though!
Title: Re: Random stuff - Luger P08
Post by: SebasDesign on June 27, 2017, 08:48:43 AM
wow this looks seriously cool! I do agree with Nico and Josh on the grenade material... it could use a faded or scrathced lable like the real ones, might give it that extra touch
Title: Re: Random stuff - Luger P08
Post by: Andrzej Orzecki on June 29, 2017, 08:40:45 PM
Firstly guys, thank so much for feedback! You all are absolutely right about grenade material. I thought that should be brand new, straight from the factory :)
So i made some changes and please tell me what do you think.

Ps. Please also checks out my very first attempt to sculpture i've made some time ago using plasticine. You can find it on my artstation account.
https://www.artstation.com/artist/andrzejorzecki_86
I'm very curious what do you think about that.

Best regards!
Title: Re: Re: Random stuff - Luger P08
Post by: NM-92 on June 29, 2017, 08:44:34 PM
Much better now Andrzej.  Regarding the sculpture, if that was your first attempt, i just say Bravo ! The details are awesome and the anatomy seems spot on (from an absolutely rookie point of view). I laughed with the software used "fingers"  ;D.
Title: Re: Random stuff - Luger P08
Post by: Hossein Alfideh on June 30, 2017, 07:13:57 AM
Great effort Andrzej! I've practiced on the same model long ago,probably one of the most incredible and highly detailed pistols on the grabcad and now I see some cool shots of it in here! keep up the good work.
Title: Re: Random stuff - Luger P08
Post by: Will Gibbons on June 30, 2017, 12:10:35 PM
Cool metal textures!
Title: Re: Random stuff - Luger P08
Post by: SebasDesign on June 30, 2017, 12:32:37 PM
oh man! now it looks perfect... that grenade material looks great
Title: Re: Random stuff - Decor set
Post by: Andrzej Orzecki on July 06, 2017, 09:48:11 AM
Hello everyone!

Thank you guys for feedback and sugestion! I really appreciate that all your help. The sculpture was my very first attempt and amazing experience. I always wanted to sculpt something and finally i found time for that. Fingers are always the best for any creative task:)
The model of that gun is really well done itself and like Hossein said,has a huge potential. Thanks once again for that all words!

Today i want to share another composition exercise i've made using few models like couch,red cactus and decor set from 3dsky.org.

As always please share your thoughts,opinion,sugestion and help.

Best regards!
Title: Re: Random stuff - Decor set
Post by: Hossein Alfideh on July 12, 2017, 07:50:18 AM
love that orange leather!
Title: Re: Random stuff - Trooper
Post by: Andrzej Orzecki on July 27, 2017, 01:34:05 AM
Hello everyone!

I would like to share with you today a special project. My colleague Piotr BiaƂecki from bialeckipiootr.wixsite.com/letmeintroducemyself created an amazing helmet model that impressed me a lot. The model itself has unlimited potential, so as my tradition says, the number of renderings has reached the limit.

I would like to once again thank Peter for this model and i hope you will like it.

As always please be free to leave any comment, suggestions, tips and tricks:)

Best regards!
Title: Re: Random stuff - Trooper
Post by: Will Gibbons on July 27, 2017, 06:27:52 AM
Helmet.490 is my favorite. Nice job!
Title: Re: Re: Random stuff - Trooper
Post by: NM-92 on July 27, 2017, 02:10:45 PM
.464 has a very cinematic feel to it. Kinda reminds me the movie "Chappie". Is the model available for download ?
Title: Re: Random stuff - Trooper
Post by: Magnus Skogsfjord on July 28, 2017, 05:06:07 AM
Awesome stuff! So much fun to work with models as detailed as this one.
Title: Re: Re: Random stuff - Trooper
Post by: Josh3D on July 28, 2017, 07:57:48 AM
The is awesome indeed. Love the detail and the retro-future style!
Title: Re: Random stuff - Trooper
Post by: Hossein Alfideh on July 28, 2017, 01:03:21 PM
These look awesome Andrzej! specially helmet.532.Love those red laser eyes.makes the helmet more scary.
well done!
Title: Re: Random stuff - Trooper
Post by: Despot on July 30, 2017, 12:30:07 AM
Lovely stuff Andrzej, my personal favourite's are the laser-scan eye variations :)