I was finally able to put it altogether today. Running at stock auto settings on the motherboard. Set at high performance on W10 Power options.
Memory now set at 2666mhz, with XMP enabled. Can run along with IRONCAD for hours without the temps going beyond 45°. I haven't tried on the Wraith Spire cooler as I installed the Be Quiet Rock Pro from the pervious build. I have no plans of overclocking the processor. System a lot quiet than my previous FX8370 build and doesn't put my 550W psu past 80%. The Eaton 5E 850i ups output load is at 163-170W on idle with 263W load on Keyshot rendering. Two panels, a Philips 273V & 243V are also plug to the ups.
I am using a customized balanced power plan with minimum power state set at 18% from the default 5%. The standard Balance and AMD Ryzen Balanced palns sort of trims the single core boost clock on the R7 1700.