KeyShot Forum

Share => Materials and Textures => Topic started by: Speedster on April 22, 2011, 03:09:37 PM

Title: For you- a versatile textured plastic
Post by: Speedster on April 22, 2011, 03:09:37 PM
Hi all-

Finally nearing the end of a year long medical device design project, and we're choosing colors and branding.  I needed a good matte pebbled finish for the plastic parts.  So I pulled a high resolution scan of the actual molded texture, cropped it in CS5 and created a normal (bump) map in filterForge.  It accepts both scale (sync it!) and height well, and works under almost everything I tested it on.

The color chips show it in action. Only one surface is mapped on the transparent chips.  The beige and charcoal is the scheme we're using for the product.

Yours to enjoy!

Bill G
Title: Re: For you- a versatile textured plastic
Post by: jjeconomaki on April 25, 2011, 09:17:22 AM
Bill:

THANKS for sharing!  That is a nice resource to have on hand!

Best-

John
Title: Re: For you- a versatile textured plastic
Post by: Imz on May 31, 2011, 04:51:24 PM
very cool- thanks Bill! Experimenting with it now...

BTW- not sure if my web site was up when we were chatting; feel free to check it out.

Imraan
-
http://www.imz-design.com