Print Page - Linear and radial brushed

Title: Linear and radial brushed
Post by: ette on April 11, 2018, 05:23:20 AM

Hi all

I need to get a material like the watch dial you can see below:

(https://i.imgur.com/vqtcvW9.png)

I know to do anisotropic and brushed materials like you can see below but not like image above:

(https://i.imgur.com/ytnbaFj.jpg)

(https://i.imgur.com/jFdBwX8.jpg)

I have made some tests with the texture you can see below, but I have not get good results:

(https://i.imgur.com/LcGAAd1.png)

Can you help me?

Thanks.

Title: Re: Linear and radial brushed
Post by: DMerz III on April 11, 2018, 11:36:39 AM

:) Keyshot has these as texture types built in.

https://luxion.atlassian.net/wiki/spaces/K7M/pages/40102219/Brushed+Radial

Title: Re: Linear and radial brushed
Post by: ette on April 11, 2018, 12:19:27 PM

Thank you for your reply,

My English is bad like you can see. What I meant is make a brushed surface like the image below, on red lines direction.

(https://i.imgur.com/1EBxhBG.jpg)

(https://i.imgur.com/Lp8iXKW.jpg)

Title: Re: Linear and radial brushed
Post by: ieatfish on April 11, 2018, 02:58:46 PM

This was my result when using the brushed materials from the library. All I did was change the mapping type of the brushed texture to cylindrical.

Title: Re: Linear and radial brushed
Post by: ette on April 12, 2018, 03:46:40 AM

Thank you very much

This is just what I'm looking for ;)

KeyShot Forum

Technical discussions => Materials => Topic started by: ette on April 11, 2018, 05:23:20 AM