KeyShot Forum

Gallery => Amazing Shots => Topic started by: Optimusglen on October 15, 2020, 08:21:28 AM

Title: Porsche engine - revisited
Post by: Optimusglen on October 15, 2020, 08:21:28 AM
I created the CAD for this (100% nurbs) over the course of a few years. I use the model as practice and have come back to it several times and re-done the materials completely. I'm still learning and progressing.

The engine is what would have been in a 1971 Porsche 911T. I am building a real-life counterpart and measured/modeled each component individually.

(https://live.staticflickr.com/65535/50486045128_6de344db14_k.jpg)

(https://live.staticflickr.com/65535/50486044073_852dfbcb4d_k.jpg)

(https://live.staticflickr.com/65535/50486750741_5c6fe3ef7c_k.jpg)

this one with headers for a 914-6, but just showing some of the internals
(https://live.staticflickr.com/65535/50486043733_b9b4052a87_k.jpg)


This is my actual engine case showing a couple material references, one for the magnesium case itself but also the yellow plated plugs, a lot of the hardware shares this plating.
(https://live.staticflickr.com/65535/50217142836_d9318f8428_b.jpg)
Title: Re: Porsche engine - revisited
Post by: novocezi on October 16, 2020, 02:53:28 AM
my wife is obsessed with porsche
I will definitely show her these pictures
Title: Re: Porsche engine - revisited
Post by: Josh3D on October 16, 2020, 09:09:12 AM
Great project! Both the model/render and the engine build.
Title: Re: Porsche engine - revisited
Post by: HaroldL on October 17, 2020, 12:36:47 PM
QuoteI created the CAD for this (100% nurbs) over the course of a few years. I use the model as practice and have come back to it several times and re-done the materials completely. I'm still learning and progressing.

The engine is what would have been in a 1971 Porsche 911T. I am building a real-life counterpart and measured/modeled each component individually.
Kudos for a great model and images. I can see why it took a few years to complete. What CAD program did you model it in?
Title: Re: Porsche engine - revisited
Post by: Optimusglen on October 20, 2020, 08:21:58 AM
Thanks guys! This was modeled in Creo
Title: Re: Porsche engine - revisited
Post by: jamesinv on October 22, 2020, 04:03:21 AM
Superb work I used to work on 911's , engine materials can be difficult to get how you want and understand fully why you have gone back to it...it looks stunning and the one good thing is to have the real thing there which is always a bonus, bravo my friend great job!!