Print Page - Bad tesselation after importing Inventor files

Title: Bad tesselation after importing Inventor files
Post by: jtreeder on January 29, 2013, 11:58:13 AM

I have the tessellation quality set to max (1) on the import dialogue, but some features of my model have poor tesselation and look bad. Here is what I'm getting (I am talking about the holes, they should be circles):

(http://i.imgur.com/n4SpQiy.jpg)

Here are the Inventor files for the model on the left:

Title: Re: Bad tesselation after importing Inventor files
Post by: KeyShot on January 29, 2013, 10:45:11 PM

Thanks. We will look into this.

Title: Re: Bad tesselation after importing Inventor files
Post by: jtreeder on January 30, 2013, 08:16:17 AM

Thanks. If it matters, I'm using Inventor 2013 and Keyshot 3.3.33.

Title: Re: Bad tesselation after importing Inventor files
Post by: jtreeder on April 16, 2013, 01:16:26 PM

I am still having this problem, and I've determined that it is not with my CAD software.

I've tried it with Inventor and ProENGINEER, and I get the same results shown above.

Any advice?

KeyShot Forum

Technical discussions => Data Import => Inventor => Topic started by: jtreeder on January 29, 2013, 11:58:13 AM