Summer is here... Have a Coke!

[Hellboy1991]

Something I Built on Wings3D and Rhino . Then added color maps(the sticker) , and the classic Coke 'Green' glass....

[TpwUK]

Certainly your best render so far - Well done
Which bit was Wings Responsible for ?

Martin

[Hellboy1991]

Thanks martin! 
... Those ridges on the sides were made in wings ...
Just couldnt get them to look right in Rhino  !

... Presently trying to 'Fill' some Coke into the Bottle... 

[TpwUK]

Same way as fluid in a glass .... In Rhino. extract an iso curve on the inside surface of your bottle, use it to create a planar disc surface. Above the disc remain as glass with a 1 or 2mm blend/fillet where the glass and disc touch. All the remaining internal glass below the disc is then assigned a new layer ready to become coke. The fillet/blend needs a layer of its own too because its a slightly different colour from the glass and the coke.

If you have some coke there with you, pour some into a glass and study it, especially at the point where coke meets glass.

Martin

[Hellboy1991]

Thats a great tip, Martin...  Thanks!

[thomasteger]

Looks really great. Great glass material.

[Hellboy1991]

Thanks :-) ... its double-sided with a refractive index of around 2.5, and a light green tinge...