Author Topic: 12x12mm tactile switch practice  (Read 1845 times)

0 Members and 1 Guest are viewing this topic.

Offline Esben Oxholm

12x12mm tactile switch practice
« on: February 01, 2019, 04:01:57 am »
Hi guys.
Had fun modeling and rendering this little fellow as a practice for this weeks renderweekly challenge on instagram: https://www.instagram.com/renderweekly/

Thanks for looking and have a great weekend!
« Last Edit: February 01, 2019, 04:06:38 am by Esben Oxholm »

Offline Finema

Re: 12x12mm tactile switch practice
« Reply #1 on: February 01, 2019, 06:22:53 am »
Really nice and realistic  ;)

Offline Hossein Alfideh

Re: 12x12mm tactile switch practice
« Reply #2 on: February 01, 2019, 07:02:37 am »
Gorgeous stuff Esben!

Offline Will Gibbons

Re: 12x12mm tactile switch practice
« Reply #3 on: February 01, 2019, 09:57:07 am »
The tone-mapping on these is juuuuuust right! Lovely!

Offline KeyShot

Re: 12x12mm tactile switch practice
« Reply #4 on: February 01, 2019, 10:02:52 am »
Wonderful image and lighting.

Offline Eric Summers

Re: 12x12mm tactile switch practice
« Reply #5 on: February 01, 2019, 12:01:17 pm »
Wow, those are great! The texture on the plastic is superb!

Offline Esben Oxholm

Re: 12x12mm tactile switch practice
« Reply #6 on: February 04, 2019, 05:39:52 am »
Thank you for the nice words, guys. Appreciate it!

Offline mattjgerard

Re: 12x12mm tactile switch practice
« Reply #7 on: February 04, 2019, 06:42:17 am »
The breadboard image brings back memories. Hours and hours of tinkering and loads of burnt caps and resistors smoking. The illuminated one is interesting, its a very deep color, not too bright either. I deal with those sort of things on a daily basis, and I like the way this one looks. I'd be interested to know what the raw image from KS looks like, I've found that the colors tend to get quite washed out unless the transmission color matches the emissive color.  We have a lot of neutral grey Cp's that get colored led's shining through and sometimes I have to cheat and color the plastic to get it to look right.

Looks fantastic :)

Offline Josh3D

Re: 12x12mm tactile switch practice
« Reply #8 on: February 05, 2019, 08:15:03 am »
Wow, this looks good. Well done, Esben.

Offline Esben Oxholm

Re: 12x12mm tactile switch practice
« Reply #9 on: February 06, 2019, 04:47:43 am »
The breadboard image brings back memories. Hours and hours of tinkering and loads of burnt caps and resistors smoking. The illuminated one is interesting, its a very deep color, not too bright either. I deal with those sort of things on a daily basis, and I like the way this one looks. I'd be interested to know what the raw image from KS looks like, I've found that the colors tend to get quite washed out unless the transmission color matches the emissive color.  We have a lot of neutral grey Cp's that get colored led's shining through and sometimes I have to cheat and color the plastic to get it to look right.

Looks fantastic :)
Thanks, Matt. Raw image attached. Originally rendered as 16-bit PSD with some image style applied.
I've attached the graph for the translucent material as well. Inside the dome, at the bottom, is a small cube with an orange area light material applied.

Wow, this looks good. Well done, Esben.
Thanks, Josh. Appreciate it!