Author Topic: How to avoid duplicated labels  (Read 263 times)

x11d and 1 Guest are viewing this topic.

Offline autumn winds

How to avoid duplicated labels
« on: July 14, 2020, 12:24:37 pm »
Hi, first of all, I tried to google this issue, but did not find any clear answer.

I have to render this vehicle with a simple label, but I can't find the way to avoid the duplicate on other surfaces of the models. Tried planar and UV mapping with no success.

Any way to avoid this? Thanks in advance

Offline TGS808

Re: How to avoid duplicated labels
« Reply #1 on: July 14, 2020, 01:16:11 pm »
Using Planar, turn off "Two Sided". If that doesn't get it done (it may not) and assuming you are working in millimeters, set the depth to .1 That should do it.

Offline autumn winds

Re: How to avoid duplicated labels
« Reply #2 on: July 15, 2020, 10:47:42 am »
it worked, thanks!

Offline eden55555

Re: How to avoid duplicated labels
« Reply #3 on: September 09, 2020, 10:11:25 am »
Using Planar, turn off "Two Sided". If that doesn't get it done (it may not) and assuming you are working in millimeters, set the depth to .1 That should do it.
You have just solved my biggest problem...thank you