Author Topic: Cannot get rid of Flyaway Fibers  (Read 2007 times)

0 Members and 1 Guest are viewing this topic.

Offline HaroldL

Cannot get rid of Flyaway Fibers
« on: January 08, 2020, 08:13:11 pm »
OK so I sent a sample part from Alibre Design to KS 9.1. Went through the Unwrapping process and applied some RealCloth material. It looked pretty good except that I could not adjust the parameters of the Flyaway fibers. Not only that, when I applied a different material the Flyaway fibers remained.  ???
I can see no way of removing them even with multiple material changes.

Offline Sune

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 83
  • Total likes: 9
  • Product Owner - Import, export and plugins
Re: Cannot get rid of Flyaway Fibers
« Reply #1 on: January 09, 2020, 01:16:05 am »
Hi.

The Flyaway fibers will stay until you execute the geometry node. In the top right corner of the real-time view you should see the icon I attached.
If you click it, the Flyaway fibers will update.

Offline HaroldL

Re: Cannot get rid of Flyaway Fibers
« Reply #2 on: January 09, 2020, 08:11:41 pm »
Thanks, I guess I should have read the manual.  :-[