Author Topic: Set Camera view in the same position it was the camera on a photo  (Read 415 times)

0 Members and 1 Guest are viewing this topic.

Offline AMR

Hi everyone!
I case someone of you can help me. I have the following question:
I want to build a 3D environment and render it with KeyShot. The idea is get a photo of a car, cut the background and position the car in the 3D environment with Photoshop.
Thats why i need to set the camera view on KeyShot in the exact same point as the camera was on the car photo.
After a few test i couldn’t do it right. Do someone of you know if its posible?
I think that the camera angle, depth of field, etc, all of that have an impact in this composition
But i couldn't realize how to do it correctly.
An Example:


Many thanks in advance to all of you!
Ariel

Offline HaroldL

Re: Set Camera view in the same position it was the camera on a photo
« Reply #1 on: June 24, 2020, 08:33:36 pm »
There are a few YouTube videos that illustrate how to match perspective when positioning models in a scene.
« Last Edit: June 25, 2020, 11:11:32 am by HaroldL »

Offline AMR

Re: Set Camera view in the same position it was the camera on a photo
« Reply #2 on: June 24, 2020, 11:17:02 pm »
HaroldL, thank you for the answer.
I watch a lots of those videos, and i made a few tests but i couldnt make it right.

I think there is a difference because in my case i want a 3D enviroment in the back and a photo of a car in the front.
(Opposite to a Background photo and a 3D model in the front, i made a lot of those and works fine).

But i found the option "Front Plate" that i didn't knew that exist, and i making some progress.

Many thanks!
Ariel.